Electronic, 3D printing and embedded programming
This article delves into the configuration of the EByte LoRa E32, we’ll guide you through the critical steps of configuration, from setting up the hardware environment to fine-tuning the software parameters. Whether you’re a seasoned developer or a curious enthusiast.
The Ebyte LoRa E32 library is a comprehensive tool designed to facilitate seamless communication with LoRa wireless modules. Developed for programmers and tech enthusiasts alike, the library enables a smooth interfacing with Ebyte’s LoRa E32 devices using MicroPython, a lean and efficient implementation of the Python 3 programming language.
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify to the server.
Now we put all the Server components in the relative Case.
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar / battery-powered to check the tank’s status and notify It to the server.
Here we are going to assemble the Client PCB.
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the status to the server.
We are going to assemble the Server PCB.
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the status to the server.
Here we are going to look at the Client software.
I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the server’s status.
Here, we are going to look at the Server software.
I have to fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify the server’s status.
Here is a little introduction to the project with the list of devices and libraries.
EByte LoRa E32 Manager: Web solution, for esp8266 and esp32, to configure and test LoRa devices
I do many projects with EByte LoRa E32, all based on my library, and many people download it, but EByte’s tools are very poor and sometimes faulty. So I tried to create a Web manager that also works as a Gateway, here’s how to interface the Back End.
