Electronic, 3D printing and embedded programming
I decided to make the WiFi module of my FlyingBear Ghost 5 more functional. I rewrote the firmware of the Makerbase MKS WiFi module and created a Web interface capable of managing all aspects of the printer and also a camera to control the process.
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well, and I explain It in this article.
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
Now we are going to analyze the changes I made to the original MKS WiFi module, with the introduction of Web Socket and some little features to develop Web interface and debug.
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
In this article I explain how the Makerbase develop the communication protocol via TCP messages and a little introduction to MKS WiFi plugin for Cura.
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
Here I’d like to explain what is the MKS WiFi module how to program and how to connect a device that can be used like WiFi module alternative.
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
In this article I would like to say a few things about the Makerbase Robin Nano board hardware and interfacing with the WiFi module.
