Category: 3D Printer

3D printing, or additive manufacturing, is the construction of a three-dimensional object from a CAD model or a digital 3D model. The term “3D printing” can refer to a variety of processes in which material is deposited, joined or solidified under computer control to create a three-dimensional object, with material being added together (such as plastics, liquids or powder grains being fused together), typically layer by layer.

EByte LoRa E70 Module Adapter: PCB, 3D Printed, Breadboard-Friendly Solution and configuration 0

EByte RF E70 Module Adapter: PCB, 3D Printed, Breadboard-Friendly Solution and configuration

To enhance the ease of use for complex modules in electronics, I’m going to show my 3D-printed adapter for the EByte RF E70 module. This design, following the footsteps of my previous projects for the ESP12 and ESP32, focuses on making the E70 module breadboard-friendly for straightforward initial configuration using a PC USB.

0

Building and programming PiCar-X: getting started with your robot car

Building and Programming Your PiCar-X: A guide to getting started with your robot car using EzBlock programming language. Learn how to assemble the parts, program your PiCar-X using drag-and-drop blocks, 3D print a simple LED holder to add lights to your car, and create a blink example. Also, learn how to use a button to turn the LEDs on and off, as well as control the camera.

LoRa wireless remote water tank and pump controller (esp8266) Client case assembling 0

LoRa remote water level and pump controller (ReWaL): assemble client and 3D printed case – 7

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify to the server.

Now we put all the Client components in the relative Case.

LoRa wireless remote water tank and pump controller (esp8266) Server case assembling 0

LoRa remote water level and pump controller (ReWaL): assemble server and 3D printed case – 6

I must fill a tank 1.5 km away, so I create a 2-part controller.
A server with a relay to manage the pump and a client solar/battery-powered to check the tank’s status and notify to the server.

Now we put all the Server components in the relative Case.